UPS Green Cell Micropower 1000VA
The Green Cell Power Proof UPS with a nominal power rating of 600W is an offline line-interactive model - this means that it is equipped with a fully automatic voltage regulator, which has a primary function as a voltage dropout protection, it also has ró protection against mains interference. The ró allows the device to switch to battery power at a level of 2-6 ms in an instant, thus protecting our work and unsaved files from loss.
AGM Green Cell batteries with a life of more than 5 years. The back-up time depends mainly on the power of the connected device and the appropriately selected UPS model, so it is worth remembering that when choosing a UPS, the power of the connected devices does not exceed 80% of its nominal value.

Due to its simple design, relatively low price and the use of a modified sine wave, the device is ideal as a protection of sensitive devices against damage caused by fluctuations in the mains or in case when the mains power failure makes it impossible to record the effects of our work. It is often used to power both cash registers and alarm systems, i.e. devices that provide safety and possibility to continue work. It is one of the most popular models used for office computers, treated as a protection against sudden voltage loss, which can cause the computer to shut down. Thanks to the Green Cell emergency power supply, you will avoid the situation in which it will be impossible to save your work on your computer. It is important to note that the UPS not only provides backup power in the event of a power outage, but also guarantees safety for often expensive electronics against voltage fluctuations.

| Technical parameters | |
| Apparent power | 1000VA |
| Power | 600W |
| Safeguards | thermal, surge, short-circuit proof |
| Product code | UPS03 |
| Weight | 7.8kg |
| Manufacturer | Green Cell |
| Guarantee | 24 months (12 months per battery) |
| Communication | USB/RJ45 |
| Indicator | LCD |
| Input voltage | 220/230/240 V |
| Input frequency | 50/60 Hz |
| Output voltage | 230 V |
| Output voltage shape | Modified sinusoidal |
| Output frequency | 50Hz or 60Hz (automatic detection) |
| Nests | 2x Schuko + 2x IEC |
| Typical charging time | 6-8 hours |
| Response time | 2-6 ms |
| Type of housing | Tower |
| Battery | 2 x 12V/7Ah |
| Topology | Line-Interactive |
| Dimensions | 353x 149 x 162 mm |